Protective Row Stop Dirt 500 ml anti dirt.
- STRUCTURED STONEWARE, NATURAL STONEWARE, POLISHED STONEWARE
WHAT IS IT FOR
- Facilitates and speeds up surface cleaning and hygiene
- Improves material resistance to dirt
- Retains the original look of the material over time
THE BENEFITS
- Provides prolonged protection over time
- Applicable to exterior and interior
- High yield
- It does not change the original degree of slipperiness of the material (tests carried out according to methods B.C.R.A. and ASTMC 1028-2007).
- Does not create superficial film
- Resists UV rays and does not yellow
HOW TO USE
- No dilution: ready to use.
Instructions for application:
Application after laying on new surface:
- Wash the floor thoroughly with DETERDEK PRO (cement joints) or CR10 (epoxy joints).
- Apply STOP DIRT evenly on the material and on the joints with fleece or other suitable applicator.
- Expert tip: Due to the high yield of the product, apply a moderate amount of product useful to the treatment of 2-3 square meters of surface at a time.
- Massage the surface with cloth or single brush with white disc.
- Within 10 minutes completely remove the product residue manually, or with a single brush, using the microfiber cloth.
- After at least 12 hours, remove any product residue with a clean microfiber cloth before moving through the treated surface.
- Application on untreated surface to be restored:
- Wash the floor with PS87 PRO and/or DETERDEK PRO.
- On a dry surface, apply STOP DIRT following the methods described above.
Attention:
- Can revive the color of the material and joints, check beforehand on
- a small portion of surface.
- Ventilate the room during use.
- Do not apply on lapped stoneware with matt finish.
INDICATIVE YIELD
- With a liter of product I do Textured stoneware, natural, polished: up to 70 m²
