Hybrid Resin Fischer FIS C 700 HP PRO.1, for anchors. FIS C 700 HP PRO.1 is certified for applications on masonry made with solid or semi-solid brick in brick or calcium silicate. It is a chemical anchor perfect also for building applications in hollow or lightened concrete blocks or cracked concrete from class C20/25 up to C50/60. FIS C 700 HP PRO.1 is certified for the use of adhesion bars with a diameter from 10 to 20 mm for the fastening of metal, wooden, for facades, stairs, awnings, canopies and many other everyday applications.
- Its performance has been tested by EOTA, the European Organization for Technical Approval, which has certified a minimum product life of 50 years, while maintaining its technical characteristics.
- Compared to most resins on the market, the FIS C 700 HP PRO.1 of boasts enormous flexibility in construction applications, with the possibility of being used without loss of strength, from -40 C to 120 C with certified performance at both high and low temperatures.
INSTRUCTIONS FOR USE
- FIS C700 HP PRO.1 and T-BOND PRO.1 are bi-component hybrid injection chemical anchors.
- Resin and hardener are in two separate containers and are not mixed or activated until extrusion takes place through the mixer.
- Before performing the installation, clean the hole as indicated.
- Extrude the resin from the bottom of the hole making sure not to leave without air bubbles.
- Insert the bar manually by rotating it until you reach the base of the hole.
- The resin adheres to the entire surface of the anchor bar and the surface of the hole, sealing it.
- The two cartridges are easy and quick to use with fischer guns.
- Partially used cartridges can be reused simply by replacing the mixer.
TECHNICAL SPECIFICATIONS
- Storage 15 months
- Content 410 ml
- Unit of scale 180
