Water repellent protection Fila HYDROREP, solvent-based, penetrates deep into the material and protects it from degradation caused by water, limiting its absorption.
- MARBLE AND GRANITE NOT POLISHED, STONE AND AGGLOMERATES NOT POLISHED, CEMENT, RECONSTRUCTED STONE
WHAT IS IT FOR
- Protects outdoor floors from water and moisture.
- Makes water-repellent walls and coatings.
- Ideal for exposed walls and concrete.
- It protects the joints.
- Defends against the degrading action of atmospheric agents.
THE BENEFITS
- Provides breathable, durable and restorable protection.
- It does not alter the aesthetics of the materials.
- It does not yellow in any environmental and aging condition.
- It has high penetration capabilities.
- It has a high yield.
- It prevents the formation of mosses and moulds.
- It is antiefflorescence.
HOW TO USE
- No dilution: ready to use.
- Application: On a dry and clean surface, apply HYDROREP with a brush or other applicator in a regular manner in two coats at a distance of 8 hours from each other.
- In the case of low absorbent stones (e.g. slate) only one coat of product is sufficient. To complete the cycle with an oleophobic protection: Apply the FOB XTREME stain protection to replace the second coat of HYDROREP.
- The surface is walkable after only 4 hours Water repellent protection is active after 24 hours FOR PROFESSIONAL USE: on vertical surfaces apply spray (airless system) dosing the waste product and using the appropriate PPE, as indicated in the safety data sheet.
ATTENTION
- On natural stone, try the product on a small portion of surface to
- check for color changes.
- Do not apply the product outside if rain is expected.
- It does not protect against acid attacks.
INDICATIVE YIELD
With a liter of product I do:
- Natural stone 10/20 m²
- Cement 5 m²
