Sealant acrylic Fischer SA BI Multipurpose water dispersion for internal applications.
CE marked for sealing facades, inner side.
- Good adhesion on porous supports.
- The water dispersion acrylic sealant is odorless and therefore is ideal for indoor use. It does not contain solvents and is non-corrosive.
- Good resistance to chemical agents and UV rays. Under extreme radiation conditions SA BI could change color.
- Resistant to water leaching (not stagnant) and moisture after hardening.
- The product is paintable. Perform a preliminary test to assess the covering capacity of the specific paint.
INSTRUCTIONS FOR USE
- Remove dirt, dust, oil and rust from surfaces. Sand or sand porous surfaces.
- Cut off the extrusion end, apply the nozzle to the cartridge cut off the tip to fit the joint size and insert into a KP fischer silicone dispenser" M" 2" PLUS or KP" M" 2.
- Apply the adhesive tape to the edges of the joint and then the product along the same.
- Level with spatula. Remove the tape from the edges of the joint.
- Clean the working tools and the non-water-hardened product. The hardened product can only be removed mechanically.
- Not suitable for applications with continuous immersion in water and in case of imminent rain or frost.
TECHNICAL SPECIFICATIONS
- Storage 12 months
- Content 310 ML
