Sealant acrylic Fischer SAR BI

• CE marked for sealing facades, inner side.
• The grainy structure is ideal for rough surfaces and ensures a look similar to raw plaster.
• The water dispersion acrylic sealant is odorless and therefore is ideal for indoor use. It does not contain solvents and is non-corrosive.
• Good resistance to chemical agents and UV rays. In extreme irradiation conditions may change staining.
• Resistant to water leaching (not stagnant) and moisture after hardening.
• The product is paintable. Perform a preliminary test to assess the covering capacity of the specific paint.

INSTRUCTIONS FOR USE

• Remove dirt, dust, oil and rust from surfaces. Sand or sand porous surfaces.
• Cut off the extrusion end, apply the nozzle to the cartridge cut off the tip to fit the joint size and insert into a KP fischer silicone dispenser" M" 2" PLUS or KP" M" 2.
• Apply the adhesive tape to the edges of the joint and then the product along the same. Level with spatula.
• Remove the tape from the edges of the joint.
• Clean the working tools and the non-water-hardened product. The hardened product can only be removed mechanically.
• Not suitable for applications with continuous immersion in water and in case of imminent rain or frost.

TECHNICAL SPECIFICATIONS

• Storage 12 months
• Content 310 ML