Laser level Leica Lino L6Rs-1

Laser level Leica Lino L6Rs-1 It has vertical laser lines projected on walls and ceilings can be easily adjusted once set the plumb point. Thanks to the micrometric screw present in the integrated laser base, it is possible to adjust the two vertical laser lines of 10, keeping the position of the plumb point.

Magnetic adapters allow you to position the instrument quickly and with absolute precision. Mount swivel adapters on edges and profiles, fasten them to iron tubes or to various supports and uprights. The concept of triple feeding mode allows continuous operation of the line laser. The latter can work with lithium-ion and alkaline batteries or alternatively with its charger.

• 360 º alignment with exceptional visibility
• A horizontal red laser line and two vertical 360 ths
• High visibility thanks to ultra-powerful red laser diodes
• Self-levelling at a wide range
• Fixed lead point thanks to integrated base
• Adjustable intensity of laser lines
• Operating range up to 25 meters
• Power supply with lithium-ion batteries to ensure up to 36 hours of operation
• Uninterrupted work thanks to the triple power mode concept
• Intelligent magnetic adapters for easy positioning

Li-ion

The innovative power supply with lithium-ion batteries guarantees many hours of autonomy. You will not have to interrupt your work to recharge the battery and you will not need to replace the alkaline batteries continuously.

Self-leveling

Leica Lino repositions automatically when it is slightly out of level (up to 4 days). When the inclination exceeds the limit, the instrument triggers a visual signal to avoid errors.

Favorite settings

Save the settings of the laser lines and their intensity on the device so that the device is already ready to use.

Uninterrupted work

The laser can work with both Li-Ion and alkaline batteries, as well as the power cord. This efficient solution with triple power mode allows you to work without interruptions.

Robust design

Leica Lino devices are protected against dust infiltration and water jets. This makes them particularly robust and suitable for construction site conditions.

TECHNICAL SPECIFICATIONS

• range up to 25/50 mt depending on lighting conditions
• range with RGR200 up to 70/140 m
• levelling accuracy 0.2mm/m
• accuracy of horizontal/vertical line 0.3mm/m
• Laser line width at 5 m distance < 2 mm
• protection class IP 54
• weight with batteries 781 g
• Tripod thread 1/4'' (+ 5/8'' with adapter)
• Autonomy with alkaline batteries: up to 25 hours (3 rays, power at 50%)/
  up to 25 hours (3 rays, power at 50%)
• Automatic pendulum levelling (lockable)
• 635 nm laser / class 2 (based on IEC 60825-1)

ACCESSORIES INCLUDED